PP601-1FeaturesPackageThrough-hole PIN Photodiode/Double-end TypeDouble-end type, Black Visible Radiation Cut Filter epoxy Product features・Photo Current : 4.8μA TYP. (VR=5V,Ee=0.5mW/cm2)・Visible Radiation Cut Filter under 700nm・No lead package・RoHScompliantPeak Sensitivity WavelengthHalf Intensity AngleDie materialsSoldering methods950nm130 deg.SiTTW (Through The Wave) soldering and manual soldering※Please refer to Soldering Conditions about soldering.2kV (HBM)Bulk : 200pcs(MIN.)ESDPackingRecommended ApplicationsElectric Household Appliances, OA/FA, PC/Peripheral Equipment, Other General Applications2005.3.31Page 1PP601-1Through-hole PIN Photodiode/Double-end TypeAbsolute Maximum RatingsItemPower DissipationReverse VoltageOperating TemperatureStorage TemperatureSymbolPdVRToprTstgAbsolute Maximum Ratings10030-30~+85-30~+100UnitmWV℃℃(Ta=25℃)Electro-Optical CharacteristicsItemPhoto CurrentResponse TimeCapacityDark CurrentPeak SensitivityWavelengthSensitivity※2Spatial Half WidthSymbolIptr/tfCTIDλpS⊿θCharacteristicsTYP.TYP.TYP.Max.TYP.TYP.TYP.4.810013309500.130UnitμAnspFnAnmA/Wdeg.(Ta=25℃)ConditionsVR=5V,Ee=0.5mW/cm2 ※1VR=10V,RL=1,000ΩVR=10V,f=1MHzVR=10VVR=0VVR=5V,λ=950nmVR=5V ※1 Color temperature is 2,856K. Employs a standard tungsten lamp. ※2 By water clear package2004.11.17Page 2PP601-1Technical DataRelative Sensitivity vs. Sensitivity WavelengthCondition : Ta = 25℃, VR= 5V Spatial Distribution ExampleCondition : Ta = 25℃Relative SensitivitySensitivity Wavelength[nm]Radiation Luminance vs. Relative Photo CurrentCondition : Ta = 25℃, VR= 10VReverse Voltage vs. Photo CurrentCondition : Ta = 25℃, Ee= 0.5mW/cm2Relative Photo Current IpRadiation Luminance Ee(mW/cm2)It is based on Ee=0.5mW/cm2.Employs a standard tungsten lamp of 2,856K.Photo Current Ip(μA)Reverse Voltage VR(V)Employs a standard tungsten lamp of 2,856K.2004.11.17Page 3PP601-1Through-hole PIN Photodiode/Double-end TypeTechnical DataReverse Voltage vs. Dark CurrentCondition : Ta = 25℃Ambient Temperature vs. Relative Photo CurrentCondition : VR= 5VReverse Voltage VR(V)Relative Photo Current Ip(mA)Dark Current ID(A)Ambient Temperature : Ta(℃)Ambient Temperature vs. Power DissipationAmbient Temperature vs. Dark CurrentCondition : VR= 5V Power Dissipation : Pd(mW)Ambient Temperature : Ta(℃)Dark Current : ID(A)Ambient Temperature : Ta(℃)2005.3.31Page 4PP601-1Through-hole PIN Photodiode/Double-end TypeTechnical DataReverse Voltage vs. CapacitanceCondition : Ta= 25℃Capacitance : CT(pF)Reverse Voltage : VR(V)2004.11.17Page 5PP601-1Through-hole PIN Photodiode/Double-end TypePackage Dimensions(Unit: mm)2004.11.17Page 6PP601-1Through-hole PIN Photodiode/Double-end TypePre-heating Solder Bath Temp.Dipping TimePosition100 ℃260 ℃5 s(MAX.) Resin surface temperature(MAX.)(MAX.)At least 3.0 mm away from resin body1) The dip soldering process shall be 2 times maximum.2) The product shall be cooled to normal temperature before thesecond dipping process.※The detail is described to LED and Photodetector handling precautions of home page: \"Mounting through-hole Type Devices“and \"Soldering\Manual Soldering ConditionsIron tip temp.Soldering time and frequencyPosition300 ℃3 s1 time(MAX.) (30 W Max.)(MAX.)(MAX.)At least 3.0 mm away from resin body※The detail is described to LED and Photodetector handling precautions of home page:\"Mounting through-hole Type Devices“and \"Soldering\2006.3.31Page 7PP601-1Through-hole PIN Photodiode/Double-end TypeReliability Testing ResultReliability TestingResultRoom Temp.Operating LifeResistance toSoldering HeatApplicable StandardEIAJ ED-4701/100(101)EIAJ ED-4701/300(302)Testing ConditionsTa = 25℃, Pd = Maxium Rated Power Dissipation 260±5℃, 3mm from package base 265±5℃, 3mm from package baseMinimum Rated Storage Temperature(30min)～Normal Temperature(15min)～Maximum Rated Storage Temperature(30min)～Normal Temperature(15min)Ta = 60±2℃, RH = 90±5%Ta = Maximum Rated Storage TemperatureTa = Minimum Rated Storage TemperatureDuration1,000 h5sec5secFailure0/160/160/16Temperature CyclingWet High Temp.Storage LifeHigh Temp.Storage LifeLow Temp.Storage LifeLead TensionVibration,Variable FrequencyEIAJ ED-4701/100(105)EIAJ ED-4701/100(103)EIAJ ED-4701/200(201)EIAJ ED-4701/200(202)EIAJ ED-4701/400(401)EIAJ ED-4701/400(403)5 cycles0/161,000 h1,000 h1,000 h0/160/160/160/160/165N,1time 10sec98.1m/s(10G), 100 ～ 2KHz sweep for 20min.,XYZ each direction2 2 hFailure CriteriaItemsSymbolsConditionsEE Value of each productIrradiance of Photo CurrentVR Value of each product ReverseVoltage of Photo CurrentVR Value of each product ReverseVoltage of Dark Current-Failure criteriaPhoto CurrentIPTesting Max. Value ≧Initial Value x 1.3Testing Min. Value ≦ Initial Value x 0.7Dark CurrentCosmetic AppearanceID-Testing Max. Value ≧ Spec. Max. Value x 1.2No notable, decoloration, deformation and cracking2005.9.26Page 8PP601-1Through-hole PIN Photodiode/Double-end TypeSpecial Notice to Customers Using the Products and Technical Information Shown in This Data Sheet1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute thewarranting of industrial property nor the granting of any license.2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design.3) When using the products described in the data sheets, pleaseadhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautionsfor use. We are not responsible for any damage which may occur if these specifications are exceeded.4) The products described in the data sheets are made to be used in standard electronic applications such as office automation appliances, communication devices, audio visual, home appliances, and measuring instruments.5) If the products in the data sheets are to be used for purposes other than the above which requires high level reliability and safety where failure and or malfunction of the product may cause death or other serious effects on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales personnel.6) In order to export the products or technologies described inthis data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,”it is necessary to first obtain an export permit from the Japanese government.7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd.8) The most updated edition of this data sheet can be obtained from the address below:http://www.stanley-components.com2004.11.17Page 9
