P6KE56资料

P6KE6.8 THRU P6KE440CABreakdown Voltage - 6.8 to 440 Volts Peak Pulse Power- 600 Watts DO-204ACTRANSZORB™TRANSIENT VOLTAGE SUPPRESSORFEATURES ♦Plastic package has Underwriters LaboratoryFlammability Classification 94V-0♦Glass passivated junction ♦600W peak pulse power capability with a 10/1000µswaveform, repetition rate (duty cycle): 0.01%♦Excellent clamping capability ♦Low incremental surge resistance ♦Fast response time: typically lessthan 1.0ps from 0 Volts to V(BR) foruni-directional and 5.0ns for bi-directional types♦Typical IDless than 1µAabove 10V♦High temperature soldering guaranteed:265°C/10 seconds, 0.375\" (9.5mm) lead length,5lbs. (2.3 kg) tension0.034 (0.86) 1.0 (25.4)MIN. 0.028 (0.71)DIA.0.300 (7.6)0.230 (5.8)0.140 (3.6) 0.104 (2.6)DIA.1.0 (25.4)MIN. MECHANICALDATACase: JEDEC DO-204AC molded plastic body over passivated junctionTerminals:Solder plated axial leads, solderable per MIL-STD-750, Method 2026Polarity: For uni-directional types the color band denotesthe cathode, which is postitive with respect to the anodeunder normal TVS operationMounting Position: AnyWeight:0.015 ounce, 0.4 gramDimensions in inches and (millimeters)DEVICES FOR BIDIRECTIONALAPPLICATIONS For bi-directional use C or CASuffix for types P6KE6.8 thru types P6KE440 (e.g. P6KE6.8C, P6KE440CA). Electrical characteristics apply in both directions.MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLVALUEUNITSPeak pulse power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1)Peak pulse current with a 10/1000µs waveform (NOTE 1)PPPMIPPMPM(AV)IFSMVFTJ, TSTGMinimum 600SEE TABLE 1WattsAmpsWattsAmpsVolts°CSteady state power dissipation at TL=75°Clead lengths, 0.375\" (9.5mm) (NOTE 2)Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load(JEDEC Method) unidirectional only (NOTE3)Maximum instantaneous forward voltage at 50.0Aforunidirectional only (NOTE 4)Operating junction and storage temperature range5.0100.03.5/5.0-55 to +175NOTES:(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5(3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum(4) VF=3.5 Volt max. for devices of V(BR)≤220V, and VF=5.0V for devices of V(BR)>220V1/21/99元器件交易网www.cecb2b.com

ELECTRICALCHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1

Breakdown VoltageV(BR)Volts (NOTE 1)Device Type+P6KE6.8+P6KE6.8A+P6KE7.5+P6KE7.5A+P6KE8.2+P6KE8.2A+P6KE9.1+P6KE9.1A+P6KE10+P6KE10A+P6KE11+P6KE11A+P6KE12+P6KE12A+P6KE13+P6KE13A+P6KE15+P6KE15A+P6KE16+P6KE16A+P6KE18+P6KE18A+P6KE20+P6KE20A+P6KE22+P6KE22A+P6KE24+P6KE24A+P6KE27+P6KE27A+P6KE30+P6KE30A+P6KE33+P6KE33A+P6KE36+P6KE36A+P6KE39+P6KE39A+P6KE43+P6KE43A+P6KE47+P6KE47AP6KE51P6KE51AP6KE56P6KE56AP6KE62P6KE62AP6KE68P6KE68AP6KE75P6KE75AP6KE82P6KE82AP6KE91MIN6.126.456.757.137.387.798.198.659.009.509.9010.510.811.411.712.413.514.314.415.216.217.118.019.019.820.921.622.824.325.727.028.529.731.432.434.235.137.138.740.942.344.745.948.550.453.255.858.961.2.667.571.373.877.981.9MAX7.487.148.257.8.028.6110.09.5511.010.512.111.613.212.614.313.716.515.817.616.819.818.922.021.024.223.126.425.229.728.433.031.536.334.739.637.842.941.047.345.251.749.456.153.661.658.868.265.174.871.482.578.0.286.1100MaximumReverseLeakageat VWMID (µA)10001000500500200200505010105.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.0MaximumPeak PulseCurrentIPPM(Amps)55.657.151.353.148.049.3.544.840.041.437.038.534.735.931.633.027.328.325.526.722.623.820.621.718.819.617.318.115.316.013.814.512.613.111.512.010.611.19.710.18..38.28.67.57.86.77.16.16.55.65.85.15.34.6MaximumClampingVoltage atIPPMVC (Volts)10.810.511.711.312.512.113.813.415.014.516.215.617.316.719.018.222.021.223.522.526.525.229.127.731.930.634.733.239.137.543.541.447.745.752.049.956.453.961.959.367.8.873.570.180.577.0.085.098.092.0108103118113131MaximumTemperatureCoefficientof V(BR)(% / C)0.0570.0570.0610.0610.0650.0650.0680.0680.0730.0730.0750.0750.0780.0780.0810.0810.0840.0840.0860.0860.0880.0880.0900.0900.0920.0920.0940.0940.0960.0960.0970.0970.0980.0980.0990.0990.1000.1000.1010.1010.1010.1010.1020.1020.1030.1030.1040.1040.1040.1040.1050.1050.1050.1050.106TestCurrentat IT(mA)1010101010101.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.0Stand-offVoltageVWM(Volts)5.505.806.056.406.637.027.377.788.108.558.929.409.7210.210.511.112.112.812.913.614.515.316.217.117.818.819.420.521.823.124.325.626.828.229.130.831.633.334.836.838.140.241.343.5.447.850.253.055.158.160.7.166.470.173.7(NOTE3) (NOTE 2)+ULlisted for Telecom application protection 497B, file number E136766 for both uni-directional and bi-directional devices

元器件交易网www.cecb2b.com

ELECTRICALCHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE (Cont’d)

Breakdown Voltage

V(BR)

Volts (NOTE 1)

Device TypeP6KE91AP6KE100P6KE100AP6KE110P6KE110AP6KE120P6KE120AP6KE130P6KE130AP6KE150P6KE150AP6KE160P6KE160AP6KE170P6KE170AP6KE180P6KE180AP6KE200P6KE200AP6KE220P6KE220AP6KE250P6KE250AP6KE300P6KE300AP6KE350P6KE350AP6KE400P6KE400AP6KE440P6KE440A

MIN86.590.095.099.01051081141171241351431441521531621621711801901982092252372702853153333603803918

MAX95.51101051211161321261431371651581761681871791981220210242231275263330315385368440420484462

MaximumReverseLeakageat VWMID (µA)5.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.0

MaximumPeak PulseCurrentIPPM(Amps)4.84.24.43.83.93.53.63.23.42.82.92.62.72.52.62.32.42.12.21.71.81.71.71.41.41.21.21.01.10.951.0

MaximumClampingVoltage atIPPMVC (Volts)125144137158152173165187179215207230219244234258246287274344328360344430414504482574548631602

MaximumTemperatureCoefficientof V(BR)(% / C)

0.1060.1060.1060.1070.1070.1070.1070.1070.1070.1080.1080.1080.1080.1080.1080.1080.1080.1080.1080.1080.1080.1100.1100.1100.1100.1100.1100.1100.1100.1100.110

TestCurrentat IT(mA)1.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.0

Stand-offVoltageVWM(Volts)77.881.085.5.294.097.2102105111121128130136138145146154162171175185202214243256284300324342356376

(NOTE3) (NOTE 2)

NOTES:

(1) V(BR)measured after ITapplied for 300µs, IT=square wave pulse or equivalent(2) Surge current waveform per Fig. 3 and derate per Fig. 2

(3) For bidirectional types with VWMof 10 volts and less, the IDlimit is doubled(4) All terms and symbols are consistent with ANSI/IEEE C62.35

+ULlisted for Telecom application protection 497B, file number E136766 for both uni-directional and bi-directional devices

DESCRIPTION

This P6KE TVS series is a low cost commercial product for use in applications where large voltage transients can permanentlydamage voltage-sensitive components.

The P6KE series device types are designed in a small package size where power and space is a consideration. They are character-ized by their high surge capability, extremely fast response time, and low impedance, (Ron). Because of the unpredictable nature oftransients, and the variation of the impedance with respect to these transients, impedance, per se, is not specified as a parametricvalue. However, a minimum voltage at low current conditions (BV) and a maximum clamping voltage (Vc) at a maximum peak pulsecurrent is specified.

In some instances, the thermal effect (see Vc Clamping Voltage) may be responsible for 50% to 70%. of the observed voltage differ-ential when subjected to high current pulses for several duty cycles, thus making a maximum impedance specification insignificant. In case of a severe current overload or abnormal transient beyond the maximum ratings, the Transient Voltage Suppressor will initiallyfail 'short' thus tripping the system's circuit breaker or fuse while protecting the entire circuit. Curves depicting clamping voltage vs.various current pulses are available from the factory. Extended power curves vs. pulse time are also available.

元器件交易网www.cecb2b.com

RATINGS AND CHARACTERISTIC CURVES P6KE6.8 THRU P6KE440CAFIG. 1 - PEAK PULSE POWER RATING CURVEPEAK PULSE POWER (PPP) or CURRENT(IPP)DERATING IN PERCENTAGE, %FIG. 2 - PULSE DERATING CURVE100PPPM, PEAK PULSE POWER, kWNON-REPETITIVEPULSE WAVEFORMSHOWN inFIG. 3 TA=25°C1001075501.0250.10.1µs1.0µs10µs100µs1.0ms10mstd, PULSEWIDTH, sec.FIG. 3 - PULSE WAVEFORM00255075100125150175200150IPPM,PEAK PULSE CURRENT, %tr=10µsec.PEAK VALUEIPPMPULSE WIDTH (td) isDEFINEDas thePOINTWHERE thePEAKCURRENTDECAYSto 50%of IPPTA, AMBIENTTEMPERATURE, °CFIG. 4 - TYPICALJUNCTION CAPACITANCEUNIDIRECTIONAL6,000100TJ=25°Cf=1 MHzVsig=50mVp-pMEASURED atZERO BIASCJ, JUNCTION CAPACITANCE, pFHALF VALUE - IPP21,0005010/1000µsec.WAVEFORMas DEFINED byR.E.A.0td01.02.0t, TIME, ms3.04.0100MEASUREDatSTAND-OFFVOLTAGE VWMPM(AV),STEADYSTATE POWER DISSIPATION,WATTSFIG. 5 - STEADYSTATE POWER DERATING CURVE5.03.75L= 0.375” (9.5mm.)LEAD LENGTHS60 HZRESISTIVE ORINDUCTIVE LOAD10110100200V(BR), BREAKDOWN VOLTAGE, VOLTS2.51.6 x 1.6 x 0.040”(40 x 40 x 1mm.) COPPER HEATSINKS1.25IFSM, PEAK FORWARD SURGE CURRENT,AMPERESFIG. 6 - MAXIMUM NON-REPETITIVE FORWARDSURGE CURRENT UNI-DIRECTIONAL2008.3msSINGLE HALF SINE-WAVE(JEDEC Method)0025507510012515017520010050TL,LEAD TEMPERATURE,°CFIG. 7- TYPICALREVERSE LEAKAGE CHARACTERISTICSID,INSTANTANEOUS REVERSE LEAKAGECURRENT, MICROAMPERES1,0001001010.10.010.0010TA=25°CMEASUREDatDEVICESSTAND-OFFVOLTAGE, VWM10110NUMBER OF CYCLES AT60 HZ100100200300400440500V(BR),BREAKDOWN VOLTAGE, VOLTS